Lab 1.3 - Upgrade, Downgrade, Enable, Disable, Add Package, and Netinstall Mikrotik

Assalamualaikum

I am back, now i will show you how to Upgrade, Downgrade, Enable, Disable, Add Package, and Netinstall Mikrotik
  
The purpose of this post is :

• The students how to know Upgrade, Downgrade, Enable, Disable, Add Package and Netinstall
• As a part of the tasks assigned by supervisor

The tools that have been needed to do is :

• RouterBoard RB951-2Hnd or other routerboard
• PC or Laptop
• UTP Cable
• Router Cable

Steps

1.  Before begin, we must turn off all the networks connection except Local Area Connection

 2. Now, open Winbox. Click on the sign ... and choose the second line. Don't forget to connect with MAC Address because we will Reset Configuration in RouterBoard first

 3. Click Connect to open Mikrotik

4. Wait until loading is Finish

5. Click System -> Reset Configuration

6. Choose Reset Configuration and don't mark anything

First we will Downgrade the RouterBoard

7. Open Winbox again and select Files

8. Search file .npk in your computer and copy

9.  Paste the file to Mikrotik

10. Wait until upload finish
 

11. Then go to the Package

12. Select Downgrade

13. Choose Yes

14. Then the Router has been disconnected, click ok

15. Connect t RouterBoard again and check the version of Mikrotik like picture below

16. Go to the package list and disable the ipv6

17. After that reboot the Mikrotik

18. Check the package list

19. And then enable the ipv6 again

20. Open files

21. Drag file mispbe 6.25.npk to Files in RouterBoard

22. After that Reboot the RouterBoard

23. Open Winbox again to check it

24. Copy all files in Package 6.25 to RouterBoard

25. Then Reboot the RouterBoard

26. Check all Packages in Files in Winbox

27. Chect the Resources in RouterBoard

28. Open System -> RouterBoard

29. Click Settings

30. Click arrow in Boot Device and choose the option "try ethernet once than nand". Click apply and OK

31. Open NetInstall 6.25 (To Upgrade 5.26 -> 6.25) and click Net Booting

32. Fill the Client IP Address and sign Boot Server Enabled

33. Click browse and search folder mispbe 6.25

34. Reboot the RouterBoard

35. Choose RB and search again mispbe 6.25

36. Give sign in mispbe 6.25

37. Click Install

38. After that click Reboot

39. Check the Resources in Winbox again

Share this

Rune